日本語 | English

HOME > Our products > SLUMP GUARD
SLUMP GUARD This cover is to set at the top of the hopper of the cement mixing vehicle and protect liquid concrete from degradation.
Main purpose of use
1. Preventing rainwater or snow from entering and protect the liquid concrete from degradation.
2. When it is sunny, it can keep the moisture of the liquid concrete in the drum of cement mixing vehicles and keep workability.
3. It also prevents other dusts from entering into the drum.

Manual slump guard ( Soft material)

Low-type & low cost product, developed from user's perspective, has become the industry standard.

Manual slump guard ( Soft material) Manual slump guard ( Soft material)
Specifications
Combination form SCM038S-10T SCM038S-4T
Seat type Keeping heat absorption minimum.
One touch opening/closing One touch operation to lock easy to open/close (Manual type)
The installation height 110mm Low installation height
It doesn't cut the rubber of the hopper. Maker standard H=250mm 033-10TSL H=320mm 031-10TSL
Easily attached. It has a stay for any kind of cement mixing style.
It is co-fastened and attached with cement mixing bolt.
The frame is also used on electric slump guard. The operation in the cab, Hopper lower operation (option) are enabled in electric specifications with additional equipment.
10t
 
MR17
 

イメージ拡大する

イメージ拡大する

イメージ拡大する

イメージ拡大する

Electric slump guard(Soft material)

Electric slump guard(Soft material) Electric slump guard(Soft material)
Specifications
Combination form SCM-037D-10T SCM-037D-4T
Seat type Silver which keeps heat absorption minimum.
The installation height 170mm Low installation height
It doesn't cut the rubber of the hopper. The maker standard for larger size H=250mm 033-10TSL H=320mm 031-10TSL
The maker standard for small size H=250mm 035-4TSL H=300mm 031-4TSL
Easily attached It has a stay for any kind of cement mixing style.
It is co-fastened and attached with cement mixing bolt.
The frame is also used on electric slump guard Option
新栄鹿島運輸
コントローラ
日産ディーゼル
コントローラ
いすゞGIGA
コントローラ
三菱ふそう

イメージ拡大する

イメージ拡大する

イメージ拡大する

イメージ拡大する

Electric slump guard(Hard material)

The designer product which came out of a concept of using a good-looking container.

Electric slump guard(Hard material) Electric slump guard(Hard material) Electric slump guard(Hard material)
Specifications
Combination form KYB MR12-52
MW16-52 Shin Meiwa
EA12-45 Kyokutou
The cover The cover made by fiber-glass reinforced plastic(It is finished with a whit gel coat. For specified color painting, it is necessary for sanding surface.
Surface : #250~320 Back : #80~100
The installation height It is approximately 235mm from the top (metal parts on right and left both side)of hopper of mixing cars.
Machinery to adjust parallel lines Structure to keep the machinery longer.
Hopper rubber process Height 190mm, the length from right to left should be shorter than 200mm long.
Easily attached It has a stay for any kind of cement mixing car style. It is co-fastened and attached with welding.
It is operated when you sit on the driver's seat Possible to open and shut by turning a switch (Outside SW)which is on the vehicle rear.
(Outside SW is an option)
Key interlocking relay units Option

イメージ
拡大する

イメージ
拡大する

イメージ
拡大する

イメージ
拡大する


HOMELatest newsCompany profileOur productsContact usQuestionsSitemap