日本語 | English

PRODUCT

SLUMP GUARD

SLUMP GUARD – Instructions for use

To close the cover

1: Push the snatch lock lever 2 up in the arrowed direction to release the lock.
2: Hold handle 1 to close the cover.

To open the cover


1: Hold handle 1.
2: Hold the handle to tip the cover to the drum side.
3: The pin on the handle side is fastened by the snatch lock.
*Make sure the lock makes a click sound and is firmly engaged.


To close the cover
1: Push the front left (power) toggle switch up to the On position.
2: Push the front right (operation switch) toggle switch down to the Close position.
* A buzzer sounds during operation. Continue until the cover is fully closed.
* After operation is finished, be sure to turn the power off every time, to prevent misoperation.

To open the cover
1: Push the front left (power) toggle switch up to the On position.
2: Push the front right (operation switch) toggle switch up to the Open position. * A buzzer sounds during operation. Continue until the cover is fully opened.
* After operation is finished, be sure to turn the power off every time, to prevent misoperation.

Cancel during operation
1: Push the front left (power) toggle switch down to the Off position.
2: Push the front right (operation switch) toggle switch in the opposite direction to the operation direction.
* Either of the 2 methods above cancel operation, stopping partway through it.
After that, the cover can be moved in either direction.

Mail Form

 

Telephone

 

 

 

 

 

 

PAGE TOP