日本語 | English

PRODUCT

SLUMP GUARD

SLUMP GUARD

It is a cover that is installed above the hopper of a concrete mixer truck to prevent quality deterioration of ready-mixed concrete.

  1. To block the entry of rain and snow into the inside of the concrete mixer truck drum, and prevent deterioration of the liquid concrete.
  2. To maintain workability by preventing the loss of moisture from liquid concrete inside the drums of concrete mixer truck.
  3. To prevent other foreign objects from entering the drums of concrete mixer trucks.
▼ Manual Slump Guard (soft top)▼ Powered Slump Guard (soft top)▼ Powered Slump Guard (hard top)

This low-profile, low-cost product was developed for usability, and has become the industry standard.

 

Compliant modelsSCM038S-10T SCM038S-4T
Sheet-typeSilver, to minimize heat absorption
One-touch opening and closingOne-touch lock operation,light opening and closing (manual type)
Mounted height 110mmLow device height
Does not cut hopper rubberManufacturer standardH=250mm 033-10TSL H=320mm 031-10TSL
Simple installationStays are provided to match various concrete mixer models.
Fasten together and attach with the bolts of the concrete mixer
Motorized and frame parts are shared.With the purchase of additional electrical parts, the equipment can be converted, as it stands, to the electrical specification, for operation from in the cab or by the hopper (option)

Compliant modelsSCM-037D-10T SCM-037D-4T
Sheet-typeSilver, to minimize heat
absorption Installed height 170mmLow device height
Does not cut hopper rubberFor large sizes Manufacturer standard Up to H=250mm: 033-10TSL H=320mm 031-10TSL
For small sizes Manufacturer standard Up to H=250mm: 035-4TSL Up to H=300mm 031-4TSL
Simple installationStays are provided to match various concrete mixer models. Fasten together and attach with the bolts of the concrete mixer
Motorized and frame parts are shared.(optional)

Designer’s product born from the concept of carrying in a beautiful container.

Compatible modelsKYB MR12-52
ShinMaywa MW16-52
Kyokuto EA12-45
Cover partFRP (with white gel coating finish: The surface must be sanded if coating of a specified color is used. Front:#250 - 320 Back:#80 - 100
Installed heightApprox. 235 from the top of the metal fixtures on the right and left of the mixer truck hopper
Parallel adjustment mechanismStructure to extend equipment lifespan
Hopper rubber treatmentHeight 190mm. Left-right length must be cut to 200mm or less.
Simple installationStays are provided to match various mixer truck models. Fasten together with bolts, or weld in place.
Operation from the driving seatOpening and closing can be done by
operating a switch (the external switch) installed at any position at the rear of the vehicle.
(The external switch is an option)
Key-linked relay unitOption

Mail Form

 

Telephone

 

 

 

 

 

 

 

PAGE TOP